off the walls specialty cleaning products inc.

oil away Marine s-200

Oil Away Marine S-200 is uniquely engineered to address the problem that occurs when water meets oil or other petroleum distillates They simply don’t get along This could be a water surface spill or even a dirty and smelly bilge pump on your watercraft.

When applied, Marine S-200 works as an emulsifier to separate the water molecules (H2O) from the carbon and hydrocarbon molecules (C). This degradation makes them water soluble and environmentally friendly. No more rainbows on the water or greasy, oily bilge cavities, Oil Away Marine S-200 is simply the best remediation product for a bridgeable solution to the problem that occurs when water and oil combine.

ready to order?

Email pmaynard@wipeoutclean.ca or use the contact form on our contact page.

★★★★★

I have been using your marine bilge product for the past several months, and want to let you know how pleased I am with the results. I now have a consistently clean and odour free bilge without having to use heavy duty chemicals and environmentally unfriendly products..

★★★★★

I first encountered Oilaway through a remediation specialist we called in to help us clean up oil contamination in the basement of an old house that we bought, which had occurred due to a long-leaking fill pipe behind the wall. I was amazed at how quickly and effectively Oilaway “ate” the oil that had soaked into the concrete floor over a prolonged period of time.

Before, 2 years of oil spills.

During, 1 Gallon of Oil Away poured out & then agitated / mixed with a bristle broom.

During, left it on for about 5 – 10 minutes & power washed it off.

After

Frequently Asked Questions

What is Oil Away S-200 used for?

Oil Away S-200 is a bioremediation accelerator designed to clean up hydrocarbon spills and leaks. It is a non-intrusive, cost-effective solution for substances such as gasoline, diesel fuels (#2–#6), jet fuel, kerosene, lubricating oils, hydraulic oils, crude oil, and similar materials.

What does Oil Away S-200 look like and how is it applied?

It is a thin white liquid that can be applied using standard spraying equipment, including pressurized sprayers or backpack sprayers.

How much Oil Away S-200 should I use?

The recommended application rate is approximately 1:1 by weight—meaning 1 pound of Oil Away S-200 for every 1 pound of hydrocarbon being treated.

How do I calculate how much product I need for a spill?

For surface spills, estimate the thickness of the hydrocarbon:
A spill approximately 5 mm thick = about 1 pound per square yard
Use this to calculate the amount of product needed at a 1:1 ratio

How do I use Oil Away S-200 on water?

Apply approximately 1:1 by weight relative to the hydrocarbon.
For thicker spills: calculate based on surface thickness
For sheens: apply a light coating to fully cover the surface
The product will cause the oil to agglomerate into small gelatinous masses that can either be skimmed off or left to naturally bioremediate.

How do I treat oil sheens on water?

Lightly coat the entire sheen with Oil Away S-200. The sheen will rapidly contract into small masses, making it easier to remove or allowing natural breakdown on the water surface.

How do I use it on contaminated soil?

For contamination below 1 foot:
Turn or remove the soil
Apply enough product to fully wet the contaminated area
Ensure airflow to maintain aerobic conditions
For heavy contamination, reapply after one week.

How do I use it on asphalt, concrete, or solid surfaces?

Saturate the contaminated area by spraying or pouring Oil Away S-200
Allow it to encapsulate the oil (reducing odour and sheen)
Agitate with a nylon brush
Let sit for 3–4 hours minimum (overnight for best results)
Rinse or power wash

How long does it take to see results?

The treated area will begin to lighten within a few weeks and will continue to improve as the bioremediation process progresses.

Do I need to reapply the product?

Yes, in certain cases:
Heavy contamination (>5 mm): apply twice, one week apart
Old or weathered stains (e.g., parking lots): two applications recommended
Heavily contaminated areas: additional applications may be needed

Can Oil Away S-200 be used on different surfaces?

Yes, it is effective on:
Water (spills and sheens)
Soil (surface and subsurface contamination)
Asphalt and concrete
Other solid surfaces contaminated with petrochemicals

Removes Oil from any surface Naturally

OilAway S-200 and Marine S-200 eliminate hydrocarbon spills or leaks with proven BIOMEDIATION technology.
Biodegrades the contamination and returns the environment to its original, pristine state – the green option for oil and fuel spill clean up.
Effective on gasoline, aviation fuel, kerosene, fuel oils #2 to #6, hydraulic oils, crude & lube oils.

Will Not Harm Metal, Rubber, Wood or Fiberglass

Environmentally friendly, commercial grade product.

Off The Walls Specialty Cleaning Products Inc

Don’t Wait, Start Your Clean Journey Today!

All prices are in Canadian dollars, with shipping and applicable taxes extra, and orders are currently shipped within Canada only as we seek a U.S. distributor.

oil away Marine s-200

1 Litre

3.7 Litre Gallon

ready to order?

Frequently Asked Questions

Removes Oil from any surface Naturally

Don’t Wait, Start Your Clean Journey Today!